HE says sensor fault to blame for long queues in Cheshire | Smart Highways Magazine: Industry News

HE says sensor fault to blame for long queues in Cheshire

Share this story...Tweet about this on TwitterShare on LinkedInShare on FacebookShare on Google+Email this to someonePrint this pageBuffer this pagePin on PinterestShare on StumbleUponShare on Tumblr

Highways England has blamed a “traffic sensor fault” for long queues that hit the A556 near Altrincham just 24 hours after the road opened.

The four-mile, £192m dual carriageway connects the M6 at junction 19 near Knutsford with junction 7 of the M56 at Bowdon.

Altrincham.today quotes Highways England as saying the delays were caused by a traffic sensor fault at the roundabout at junction 19 of the M6, which has recently been resurfaced as part of a separate scheme, “The queuing issues commenced at the end of January when a large number of vehicles began to use the junction from the Northwich direction as a result of structural works being carried out on Acton Bridge by Cheshire West Council. These works are due to continue until July 2017.

“In February engineers from the routine maintenance contractor checked the traffic signals to confirm they were working correctly and extended the green phases to relieve the congestion.

“At the end of February the roundabout was resurfaced as part of routine maintenance and new sensors fitted for the traffic signals. This work was delayed slightly due to the storm that hit the north west.

“On the morning of Monday 6th March we opened the new A556 and to ensure that the work on the traffic signals had been effective we had engineers on site monitoring the signals. There was no problem with traffic flows around the roundabout or on any associated roads and the signals were returned to operate as an automated system.

“It became obvious during the peak periods of traffic on Monday afternoon and Tuesday morning that there is still an issue with the traffic signals.”

The website says that Highways England has apologised for the disruption and said that its engineers had identified a fault and were working on a resolution which would “return the traffic signals to full working order”.

 
Comments

No comments yet.